Filter
Top Products
55
Getting started
Parking and locking
̈ After exiting the vehicle, press the lock
button ‹ on the SmartKey
(
୴ page 30).
All turn signal lamps flash three times.
The locking knobs in the doors move
down.
For more information, see “Locking and
unlocking” (
୴ page 88).
Turning off the engine with
KEYLESS-GO*
̈ Place the gear selector lever in P.
̈ Press the KEYLESS-GO start/stop but-
ton to shut off the engine.
With the driver's door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
(
୴ page 31).
̈ Press the seat belt release button
(
୴ page 42).
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
Warning! G
To prevent possible personal injury, always
keep hands and fingers away from the door
openings when closing the doors. Be espe-
cially careful when small children are
around.
Before closing doors, make sure there is no
possibility of someone getting caught in a
door during closing.
i
Opening a door causes the windows on
that side of the car to open slightly.
They will return to the up position when
the door is closed.
Warning! G
When leaving the vehicle, always remove the
SmartKey from the starter switch and lock
your vehicle. Do not leave children unat-
tended in the vehicle, or with access to an
unlocked vehicle. Unsupervised use of vehi-
cle may cause an accident and/or serious
personal injury.
୴୴