Filter
Top Products
297
Operation
Tires and wheels
Important guidelines
ț Only use sets of tires and rims of the
same type and make.
ț Tires must be of the correct size for the
rim.
ț Break in new tires for approximately
60 miles (100 km) at moderate
speeds.
ț Regularly check the tires and rims for
damage. Dented or bend rims can
cause tire pressure loss and damage
the tire beads.
ț If vehicle is heavily loaded, check tire
pressure and correct as required.
ț Do not allow your tires to wear down
too far. Adhesion properties on wet
roads are sharply reduced at tread
depths under
1
/
8
in (3 mm).
ț When replacing individual tires, you
should mount new tires on the front
wheels first (on vehicles with
same-sized wheels all around).
Life of tires
The service life of a tire is dependent upon
various factors including but not limited to:
ț Driving style
ț Tire pressure
ț Distance driven
Direction of rotation
Unidirectional tires offer added advantag-
es, such as better hydroplaning perfor-
mance. To benefit, however, you must
make sure the tires rotate in the direction
specified.
An arrow on the sidewall indicates the in-
tended direction of tire rotation.
Warning! G
Tires and spare tire should be replaced after
six years, regardless of the remaining tread.
!
Keep unmounted tires in a cool, dry
place with as little exposure to light as
possible. Protect tires from contact
with oil, grease and gasoline.