Filter
Top Products
150
Controls in detail
Control system
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature. When the
feature is activated, the steering wheel and
driver’s seat will move back to facilitate ex-
iting when you
ț remove the SmartKey from the starter
switch
ț open the driver’s door
However, the engine must be turned off.
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when
ț the driver’s door is closed.
ț you put the SmartKey in the starter
switch or press the KEYLESS-GO*
start/stop button.
ț press the appropriate stored position
button on the memory switch
(
୴ page 116).
Warning! G
You must make sure no one can become
trapped or injured by the moving steering
wheel and the driver’s seat when the
easy-entry/exit feature is in operation and
the driver’s door is being opened or the
SmartKey is removed from the starter
switch.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
To cancel seat/steering wheel move-
ment, do one of the following:
ț Press seat adjustment switch
(
୴ page 35)
ț Move the steering column stalk
(
୴ page 38)
ț Press the memory switch
(
୴ page 116)