Filter
Top Products
39
Getting started
Adjusting
Exterior rear view mirror
The buttons are located above the exterior
lamp switch.
1 Adjustment button
2 Passenger-side exterior rear view mir-
ror button
3 Driver’s side exterior rear view mirror
button
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
come on.
̈ Press button 3 for the left mirror or
button 2 for the right mirror.
̈ Push adjustment button 1 up, down,
left or right according to the desired
setting.
For more information, see “Activating exte-
rior rear view mirror parking position”
(
୴ page 169).
Warning! G
Exercise care when using the passenger
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your in-
terior rear view mirror or glance over your
shoulder before changing lanes.
!
Electrolyte drops coming into contact
with the vehicle paint finish can only be
completely removed while in their liq-
uid state and by applying plenty of wa-
ter
!
If an exterior rear view mirror was forc-
ibly pushed forward (hit from the rear)
or forcibly pushed rearward (hit from
the front), reposition it by applying firm
pressure until it snaps into place. The
mirror housing is now properly posi-
tioned and you can adjust the mirror
normally.
i
The memory function (୴ page 116) lets
you store the setting for the exterior
rear view mirrors together with the set-
tings for the steering wheel and seat
position.
i
At low ambient temperatures, the mir-
rors will be heated automatically.