Filter
Top Products
234
Controls in detail
Driving systems
Activating Distronic
You can activate Distronic if
ț you are driving between 25 mph
(40 km/h) and 110 mph (180 km/h)
ț the ESP is activated (୴ page 79)
If Distronic has not been activated after
pressing the cruise control lever you will
see the message
---
in the multifunction
display.
In the following cases you cannot activate
Distronic:
ț up to two minutes after starting the en-
gine.
ț when you brake.
ț if you have set the parking brake.
ț if the gear selector lever is in
position P, R or N.
ț if ESP is switched off.
Setting the current speed
̈ Accelerate or decelerate to the desired
speed.
̈ Briefly lift or depress the cruise control
lever.
Distronic is activated and the current
speed is set.
̈ Remove your foot from the accelerator
pedal.
Setting a higher speed
̈ Briefly tip cruise control lever in the di-
rection of arrow 1 (
୴ page 233) to in-
crease vehicle speed in increments of
5 mph (Canada: 10 km/h).
The new speed is set.
The stored speed is displayed in the
multifunction display for approximately
five seconds (
୴ page 233), and one or
two segments around the stored speed
come on, on the speedometer
(
୴ page 231).
i
If you do not take your foot off of the
accelerator completely, the following
message will appear in the multifunc-
tion display:
Distronic override
.
Distronic will not work to maintain the
distance to slower moving vehicles in
front of you. Your vehicle speed will
then be determined only by the accel-
erator pedal position.
i
Depressing the accelerator pedal does
not deactivate Distronic. After brief ac-
celeration (e.g. for passing), the cruise
control will resume the last speed set.