Filter
Top Products
151
Controls in detail
Control system
̈ Move the selection marker with
the æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Function Easy-entry feature
.
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
Setting key-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey or SmartKey
with KEYLESS-GO (
୴ page 116).
̈ Move the selection marker with
the æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Key-dependent
.
The selection marker is on the current
setting.
̈ Press æ or ç to set key-depen-
dency to
on
or
off
.
Setting parking position for exterior rear
view mirror
Use the
Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers, when reverse gear is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
୴ page 169).
off
The easy-entry/ex-
it feature is deacti-
vated.
Steering col.
Only the steering
column is moved.
Steer. col. + seat
Both the steering
column and the
seat are moved.