Filter
Top Products
137
Controls in detail
Control system
NAV menu
The
Nav
menu contains the functions need-
ed to operate your navigation system.
̈ Press button è or ÿ repeatedly
until you see the message
Nav
in the
display.
ț If the navigation system is switched off,
the message
Nav off
is shown in the
display.
ț If the navigation system is on, the mes-
sage
Nav active
is shown in the dis-
play.
Please refer to the COMAND* manual for
instructions on how to activate the route
guidance system*.
Distronic* menu
Use the Distronic menu to display the cur-
rent settings for your Distronic system.
What information is shown in the display
depends on whether the Distronic system
is active or inactive.
Please refer to the “Driving systems” sec-
tion of this manual (
୴ page 229) for in-
structions on how to activate Distronic.
̈ Press button è or ÿ repeatedly
until you see one of the following two
pictures in the display.
Distronic deactivated
When Distronic is deactivated you will see
the standard display in the display.
1 Vehicle ahead, if detected
2 Actual distance to vehicle ahead
3 Preset distance threshold to vehicle
ahead
4 Your vehicle
5 Symbol for activated distance warning
function
i
To select the reverse side of the tape,
press button below track number on
the audio system display, or enter re-
quest on the COMAND* system locat-
ed in the center dashboard.