Filter
Top Products
54
Getting started
Parking and locking
Switching off headlamps
̈ Turn the exterior lamp switch to M
(
୴ page 47).
For more information, see “Lighting”
(
୴ page 119).
Turning off the engine
̈ Place the gear selector lever in
position P.
Turning off the engine with the
SmartKey
̈ Turn the SmartKey in the starter switch
(
୴ page 31) to position 0 and remove
it.
The immobilizer is activated.
̈ Press the seat belt release button
(
୴ page 42).
Allow the retractor to completely re-
wind the seat belt by guiding the latch
plate.
i
Always set the parking brake in addi-
tion to shifting to position P.
On steep slopes, turn the front wheels
towards the curb.
i
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.
!
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.