Filter
Top Products
221
Controls in detail
Soft top
Unlocked status noticed when stopped
̈ Switch on the ignition.
̈ To lock the soft top in its fully closed
position, press soft top switch.
The message
Top closed
will be shown
in the multifunction display.
or:
̈ To lock the soft top in its fully opened
position, pull up on the soft top switch.
The message
Top open
will be shown in
the multifunction display.
Unlocked status noticed while driving
̈ Stop the vehicle.
̈ Leave the ignition switched on.
̈ To lock the soft top in its fully closed
position, press soft top switch.
The message
Top closed
will be shown
in the multifunction display.
or:
̈ To lock the soft top in its fully opened
position, pull up on the soft top switch.
The message
Top open
will be shown in
the multifunction display.
Warning! G
Stop the vehicle and lock the soft top before
continuing to drive. You could otherwise en-
danger yourself and others.
Warning! G
If the soft top does not completely open or
close, the roof hydraulics will lose pressure
and the soft top is lowered
ț after approximately seven minutes
when the ignition is switched on
ț after approximately 15 seconds when
the ignition is switched off
Shortly before the soft top is lowered, a
warning will sound and the soft top switch
lamp will flash. In the multifunction display
you will see K, and the message
Top
being lowered!
appears
ț Properly lock the soft top (୴ page 220)
before continuing to drive