Filter
Top Products
222
Controls in detail
Soft top
Opening and closing the soft top with
the SmartKey
The windows will also be opened or closed
when you operate the power windows with
the SmartKey.
̈ Aim the transmitter eye at the door
handle.
Opening (Summer opening feature)
̈ Press and hold button Œ until the
soft top is completely open.
The windows and soft top begin to
open after approximately one second.
During the opening procedure the mul-
tifunction display shows the message
Top in operation
.
If the opening procedure is finished,
the multifunction display will briefly
show the message
Top open
.
̈ Release transmit button Œ to inter-
rupt procedure.
Warning! G
Before operating the soft top, make sure no
persons can be injured by the moving parts
(roll bar, soft top frame, and soft top com-
partment cover) due to negligence.
Hands must never be placed near the roll
bar, soft top frame, upper windshield area,
shelf behind roll bar, or soft top storage
compartment while the soft top is being
raised or lowered. Serious personal injury
may occur.
If potential danger exists, release the re-
spective button on the SmartKey. This im-
mediately interrupts the raising or lowering
procedure. You then can operate Πto
lower or ‹ to raise the soft top away
from the danger zone.