Filter
Top Products
189
Controls in detail
Power windows
Closing the windows
̈ Lightly press the j symbol on one
of the switches 1 to 4 until the corre-
sponding window reaches the desired
position.
When pulling and holding the switch to
close the window, and upward movement
of the window is blocked during the last
few inches before closure, the window will
stop but not open slightly.
Fully opening windows
̈ Press the k symbol on one of the
switches 1 to 4 beyond the point of re-
sistance and then release the switch.
The window opens completely.
Fully closing windows
̈ Press the j symbol on one of the
switches 1 to 4 beyond the point of re-
sistance and then release the switch.
The window closes completely.
If the upward movement of the window is
blocked during the closing procedure, the
window will stop and open slightly.
Stopping windows
̈ Press respective switch again.
Warning! G
Driver’s door only:
If within five seconds you again press the
switch past the resistance point and re-
lease, the automatic reversal function will
not function.
i
You can also open or close the win-
dows using the:
ț SmartKey (୴ page 190)
ț O button in the control panel of
the automatic climate control
(
୴ page 175)
ț e button in the control panel of
the automatic climate control
(
୴ page 175).