Filter
Top Products
149
Controls in detail
Control system
Instrument cluster submenu
Access the
INST. CLUSTER
submenu via
the
SETTINGS
menu. Use the
INST. CLUS-
TER
submenu to change the instrument
cluster display settings. The following
functions are available:
Selecting temperature display mode
̈ Move the selection marker with
the
æ or ç button to the
INST.
CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
TEMP. INDICATOR
.
The selection marker is on the current
setting.
̈ Press æ or ç to set the temper-
ature unit to degrees Celsius (°C) or
degrees Fahrenheit (°F).
Selecting multifunction display mode
̈ Move the selection marker with
the
æ or ç button to the
INST.
CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
DISPLAY VALUES IN
.
The selection marker is on the current
setting.
̈ Press æ or ç to set speedome-
ter unit to
MILES
or
KM
.
Function Page
Select temperature display
mode
150
Select multifunction display
mode
149
Select language 150