Filter
Top Products
146
Controls in detail
Control system
̈ Press button k or j.
The stored messages will now be dis-
played in the order in which the mal-
functions have occurred. See the
“Practical hints” section for malfunc-
tion and warning messages
(
୴ page 296).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch.
Settings menu
In the
SETTINGS
menu there are two func-
tions:
ț The function
TO RESET: R BUTTON FOR
3 SEC.
, with which you can reset all
settings to the original factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
SETTINGS
menu appears in the
display.
Resetting all settings
You can reset all the functions of all sub-
menus to the factory settings.
̈ Press the reset button J in the instru-
ment cluster for approximately three
seconds.
In the display you will see the request
to press the reset button
J again to
confirm.
̈ Press the reset button J again.
The functions of all the submenus will
reset to factory settings.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see high priority messag-
es in the malfunction display
(
୴ page 296).
i
The settings you have changed will not
be reset unless you confirm the action
by pressing the reset button
J a sec-
ond time.
Due to safety reasons, resetting all of
the settings while driving will not reset
all of the values in the
LIGHTING
or the
VEHICLE
menu.