Filter
Top Products
164
Controls in detail
Automatic transmission
Program mode selector switch
1 Program mode selector switch
S Sport For standard driving
C Comfort For comfort driving
̈ Press the program mode selector
switch repeatedly until the letter of the
desired shift program appears in the ta-
chometer display field (
୴ page 130).
Select C for comfort driving:
ț The vehicle starts out in second
gear (both forward and reverse) for
gentler starts. This does not apply if
full throttle is applied or gear
range 1 is selected.
ț Traction and driving stability are im-
proved on icy roads.
ț Upshifts occur earlier even when
you give more gas. The engine then
operates at lower rpms and the
wheels are less likely to spin.
ț The power transmission ratio for se-
lector lever position R changes de-
pending on the program mode
selected (C or S).
Warning! G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take the
KEYLESS-GO* card (if so equipped) with you
and lock the vehicle. Do not leave children
unattended in the vehicle, or with access to
an unlocked vehicle. Children could move
the selector lever from position P, which
could result in an accident and/or serious
personal injury.
!
Never change the program mode when
the selector lever is out of position P.
This could result in a change of driving
characteristics for which you may not
be prepared.