Filter
Top Products
158
Controls in detail
Control system
Setting parking position for exterior rear
view mirror
Use the
MIRROR SETTING WHEN PARKING
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear R is engaged. For
additional information see “Activating ex-
terior rear view mirror parking position”
(
୴ page 169).
̈ Move the selection marker to the
CONVENIENCE
submenu using the æ
or
ç button.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
MIRROR SETTIMG WHEN PARKING
.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
ON
or
OFF
.
Setting fold-in function for exterior rear
view mirrors
Using this function, you can set the exteri-
or rear view mirrors to be automatically
folded in when you lock your vehicle
(
୴ page 170).
̈ Move the selection marker to the
CON-
VENIENCE submenu
with the æ or
ç button.
̈ Press the j or k button repeat-
edly until the message
FOLD MIRRORS
WHEN LOCKING
appears in the display.