Filter
Top Products
99
Controls in detail
Seats
Multicontour seat*
The multicontour seat has a movable seat
cushion and inflatable air cushions built
into the seat backrest to provide additional
lumbar and side support.
The seat cushion movement, seat backrest
cushion height and curvature can be con-
tinuously varied with regulators on the
right side of the seat after turning the
SmartKey in the starter switch to
position 2 or pressing the KEYLESS-GO*
start/stop button twice.
1 Shoulder region support
2 Side bolster adjustment
3 Massage function (PULSE)
4 Lumbar region support
Adjusting the multicontour seat in the or-
der listed above is recommended.
̈ Make sure the ignition is switched on.
All lamps in the instrument cluster light
up.
Shoulder region support
̈ Press æ or ç on switch 1.
The air cushion inflates or deflates.
Lumbar region support
̈ Press k or j on rocker
switch 4.
This selects the air cushion you wish to
adjust.
̈ Press æ or ç on rocker
switch 4.
The air cushion inflates or deflates.
Side bolsters adjustment
̈ Adjust the side bolsters so that they
provide good lateral support using
switch 2.
i
When the engine is turned off, the last
cushion setting is retained in memory,
and the cushion is automatically ad-
justed to this setting when the engine
is restarted.