Filter
Top Products
131
Controls in detail
Control system
̈ Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occurred, the mes-
sage in the display is:
NO MALFUNCTION
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
̈ Press button k or j.
The stored messages will now be dis-
played in order. See the “Practical
hints” section for malfunction and
warning messages (
୴ page 270).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the key in the
starter switch is turned to position 0 or re-
moved from the starter switch.
Settings menu
In the
SETTINGS
menu there are two func-
tions:
ț The function
TO RESET: R BUTTON FOR
3 SEC.
, with which you can reset all the
settings to the original factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the
SETTINGS
menu appears in the
display.
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see high priority malfunctions
(
୴ page 270).