Filter
Top Products
36
Getting started
Adjusting
Head restraint height
̈ Press the switch up or down in the di-
rection of arrow 1.
Seat height
̈ Press the switch up or down in the di-
rection of arrow 2.
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow 3 until your upper legs
are lightly supported.
Seat cushion depth
̈ Press the switch forward or backward
in the direction of arrow 4 until your
legs are supported comfortably.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 5.
Adjust to a comfortable seating posi-
tion that still allows you to reach the
accelerator/brake pedal safely. The
position should be as far to the rear as
possible, corresponding to the driver’s
ability to properly operate the controls.
Seat backrest tilt
̈ Press the switch forward or backward
in the direction of arrow 6 until your
arms are slightly angled when holding
the steering wheel.
Head restraint tilt
̈ Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
i
When moving the seat, be sure that
there are no items in the footwell or be-
hind the seats. Otherwise you could
damage the seats.