Filter
Top Products
124
Controls in detail
Control system
Clean CDs from time to time with a com-
mercially available cleaning cloth. No sol-
vents, anti-static sprays, etc. should be
used for cleaning. Replace the CD in its
case after use. Protect CDs from heat and
direct sunlight.
Only use CDs, which bear the label shown
and that conform to the compact disc dig-
ital audio standard (IEC 60908).
Use of CDs which do not meet this stan-
dard may cause damage to the CD chang-
er. Do not play single-CDs (80 mm) with an
adapter.
For information operating the CD changer
refer to the separate COMAND operating
instructions.
Operational readiness of CD changer
If a CD changer has been installed in the
system, it can be operated from the CO-
MAND system key pad located in the cen-
ter dashboard. A loaded magazine must be
installed for CD playing.
Loading/unloading the CD magazine
The CD changer is located behind the cov-
er on the left hand side in the trunk.
̈ Remove the CD changer cover.
̈ Slide the CD changer door to the right
and press the eject button
3.
̈ The magazine is ejected.
1 CD
2 CD changer
3 CD tray
4 CD magazine
̈ Remove the magazine and completely
pull out the CD tray.
̈ Place the CD in the recess of the tray,
label side up.
̈ Push the tray into the magazine in the
direction shown by the arrow.
Warning! G
The CD changer is a Class 1 laser product.
There is a danger of invisible laser radiation
if the cover is opened or damaged.
Do not remove the cover. The CD changer
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.