Filter
Top Products
142
Controls in detail
Control system
Setting parking position for exterior rear
view mirror
Use the
MIRROR SETTING WHEN PARKING
function to select whether the passenger
side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear is engaged. For ad-
ditional information see “Setting parking
position for exterior rear view mirror”
(
୴ page 142).
̈ Move the selection marker to
the
CONVENIENCE
submenu using
the
æ or ç button.
̈ Press the j or k button repeat-
edly until the message
MIRROR SETTING
WHEN PARKING
appears in the display.
The selection marker is on the current
setting.
̈ Press æ or ç to switch function
ON
or
OFF
.
Setting fold-in function for exterior rear
view mirrors
Using this function, you can set the exteri-
or rear view mirrors to be automatically
folded in when you lock your vehicle
(
୴ page 152).
̈ Move the selection marker to
the
CONVENIENCE
submenu using
the
æ or ç button.
̈ Press the j or k button repeat-
edly until the message
FOLD MIRRORS
WHEN LOCKING
appears in the display.
The selection marker is on the current
setting.
̈ Press the æ or ç button to
switch the automatic fold-in setting for
the mirrors
ON
or
OFF
when the vehicle
is locked.