Filter
Top Products
174
Controls in detail
Sliding/pop-up roof
Opening the sliding/pop-up roof auto-
matically
̈ To select a sunroof opening position,
press the switch to the resistance point
and release it when the sunroof has
reached the required position.
The sliding/pop-up roof now opens to
the position set if the switch is pressed
past the resistance point in the “open”
direction.
Closing the sliding/pop-up roof auto-
matically
̈ Press the switch past the resistance
point in the “close” direction and re-
lease.
The sliding/pop-up roof closes com-
pletely.
Stopping the sliding/pop-up roof
̈ Move the switch in any direction.
If the movement of the sliding/pop-up
roof is blocked during the closing pro-
cedure, the roof will stop and reopen
slightly.
Opening and closing the sliding/
pop-up roof with the SmartKey
The power windows will also be opened or
closed when you operate the sliding/
pop-up roof with the key.
̈ Aim transmitter eye at the front door
handle.
i
You can also open or close the sliding/
pop-up roof using the:
ț SmartKey (୴ page 171)
ț button O in the control panel of
the automatic climate control
(
୴ page 159)
ț button e in the control panel of
the automatic climate control
(
୴ page 159)
!
To avoid damaging the seals, do not
transport any objects with sharp edges
which can stick out of the sliding/
pop-up roof.
The sliding/pop-up roof can be opened
or closed manually should an electrical
malfunction occur (
୴ page 301).
Warning! G
Never operate the windows or sliding/
pop-up roof if there is the possibility of any-
one being harmed by the opening or closing
procedure.
In case the procedure causes potential dan-
ger, the procedure can be stopped immedi-
ately by releasing the remote control button.
To reverse direction of movement,
press
Œ for opening or ‹ for closing