Filter
Top Products
96
Controls in detail
Seats
Seats
Information on seat adjustment can be
found in the “Getting started” section
(
୴ page 34).
Lumbar support
You can adjust the contour of the seat’s
lumbar support to best support your back.
The thumbwheels for the driver’s and front
passenger’s seat are on the inner side of
the seat.
1 Thumbwheel
̈ Make sure the ignition is switched on.
All the lamps in the instrument cluster
should light up.
̈ Set the lumbar support between 0
and 5.
Easy-entry/exit feature
With the easy-entry/exit feature activat-
ed, the steering wheel tilts upwards and
the driver’s seat moves to the rear.
This allows easier entry into and exit from
the vehicle when the driver’s door is
opened. However, the engine must be
turned off.
When the SmartKey is inserted in the start-
er switch or you have pressed the
KEYLESS-GO* start/stop button once and
the driver’s door is closed, the steering
wheel and the driver’s seat return to their
last set positions.
You can activate the following functions:
ț Steering column:
Only the steering column is adjusted.
ț Steering column and seat:
Both the steering column and the seat
are adjusted.
The easy-entry/exit feature can be
switched on or off in the in the settings
menu of the control system (
୴ page 140).
Warning! G
You must make sure that no one can be-
come trapped or injured by the moving
steering wheel and driver’s seat when the
easy-entry/exit feature is activated, the
driver’s door is being opened, and the en-
gine is turned off or the SmartKey removed
from the starter switch. Do not leave chil-
dren unattended in the vehicle, or with ac-
cess to an unlocked vehicle. Unsupervised
use of vehicle equipment may cause an ac-
cident and/or serious personal injury.