Filter
Top Products
107
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gear R.
For information on activating the parking
position, see “Setting parking position for
exterior rear view mirror” (
୴ page 142).
The buttons are located on the driver’s
door.
1 Exterior rear view mirror
2 Adjustment button
M Memory button
̈ Stop the vehicle.
̈ Switch ignition on (if not already on).
̈ Press button 1.
The passenger-side exterior rear view
mirror is selected.
̈ Adjust the exterior rear view mirror
with button 2 so that you see the rear
wheel and the road curb.
̈ Press memory button M.
̈ Within three seconds, press bottom of
adjustment button 2.
The parking position is stored if the
mirror does not move.
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each key or KEYLESS-GO* card.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.