Magellan PRO 10 GPS Receiver User Manual


  Open as PDF
of 27
 
Setup
Magellan eXplorist Pro 10 GPS Receiver 6
Language Selection
Some versions of the eXplorist Pro 10 support languages other than English. If the version you have supports
otherlanguagesyouwillbepromptedtoselectthelanguagewhenyouturntheeXploristPro10onforthersttime
CAUTION: The selection of the language is irreversable. Once a language has been selected it
cannot be changed.
Selecting Language
1. Whenturningthereceiveronforthersttimeyou
may be prompted to select the language to be used
for the device and its applications.
2. If prompted, use the side buttons (A and B) to
highlight the desired language.
3. Once the language is highlighted, press the Power
button (C) to accept the language.
NOTE: If you are unsure what language to select,
press and hold the Power button (C) for 3 seconds. The
receiver will turn off without a language selected and
you will be prompted again the next time the receiver is
turned on.
 previous next