Filter
Top Products
Magellan CrossoverGPS Music Manager 54
Magellan CrossoverGPS Music Manager
The Magellan CrossoverGPS Music Manager enables you to transfer song files in MP3 or
WMA format from your computer to the SD memory card installed in your Magellan
CrossoverGPS. The amount of music you can load depends on the size of the memory
available on your installed SD card. You can also choose to transfer your music files to a
new, optional SD card but the detailed map and speed trap POIs will be unavailable.
Insert the memory card into the memory card slot. Turn on your Magellan CrossoverGPS
by pressing and holding the Power button down for approximately 2-3 seconds if in sleep
mode. (Ten seconds if not in sleep mode.) When the Warning screen appears, insert the
small end of the USB cable into the USB port on your Magellan CrossoverGPS and the
large end into an available USB port on your computer.
Launch the Magellan CrossoverGPS
Tools application. From the Magellan
CrossoverGPS Tools screen, click on
Music.
The left side of the window shows the
contents of your computer and the right
side of the window shows the contents
of the memory card installed in your
Magellan CrossoverGPS.
Locate the song files you wish to load.
When you have selected a file, the
Transfer arrow will turn green. Click on
the Transfer arrow to copy the file(s) to
the memory card.
In the same way, if you have loaded
song files onto a memory card from
another computer, you can copy the
files from the memory card to your
computer.
When you have finished copying files,
remove the USB cable from the Magellan CrossoverGPS.