Filter
Top Products
Setting User Options 44
Route Preferences (Vehicle Navigation only)
You can turn automatic re-routing on or off. With automatic re-routing on, the receiver will
automatically recalculate the route whenever you leave the planned route.
Automatic Re-Routing: When checked, automatic re-routing is on.
Navigation Mode (Vehicle Navigation only)
You can select whether the Car/Motorcycle or Pedestrian mode should be proposed by
default when calculating a route. This navigation mode can always be overridden when
you select your destination.
Detour Options (Vehicle Navigation only)
The Magellan CrossoverGPS detects when you are on a route and moving slowly or not
moving at all on a motorway. It then provides you with the option of detouring around the
problem area. It can alert you visually on the map by displaying the detour icon or you can
set it not to alert you so you can select detour from the main menu yourself.
3 mi/5 mi/10 mi (5km /10km/15km) or Custom: This setting determines the
distance that the detour will take you around. (If you are stationary on a motorway
and select detour, the Magellan CrossoverGPS will calculate the detour and try to
get you back on the original route in the distance specified.)
Enable automatic detour: This defines if the detour icon will be shown on the map
when the Magellan CrossoverGPS determines that a detour should be used.
Alert After: This sets the duration when you are stationary or moving slowly on the
motorway before a detour icon is displayed.
Example: Settings of ‘3 mi’, ‘Enable automatic detour’ on, and ‘Alert After’ set to 1
min. You are being routed on a motorway and have been moving at 10 mph due to
a traffic jam ahead. After 1 minute of moving slowly, the detour icon will be
displayed on the left side of the map indicating that a detour should be used. If
you want to activate the detour, press on MENU and select ‘Detour’. Press ‘Route’
and the Magellan CrossoverGPS will calculate a new route, detouring around the
next 3 miles.