Filter
Top Products
69
Surface Clarity turned off (left). Surface Clarity set to High (right).
Units of Measure
This menu sets the speed and distance (statute or nautical miles,
meters), depth (feet, fathoms, or meters) and temperature (degrees
Fahrenheit or Celsius). To change units:
Press
MENU|MENU|↓ to UNITS OF MEASURE|ENT.
Main Menu (left) Units of Measure Menu (right).
To set Speed/Distance Unit of Measure, press ↑ or ↓ to change the
SPEED/DISTANCE, then press ENT. After the option is set, press EXIT|EXIT
to return to the main page display.
To set Depth units from the Units of Measure menu, press → to
DEPTH. Use the ↑ ↓ keys to highlight the measure you want to use for
depth and press ENT. After the option is set, press EXIT|EXIT to return
to the main page display.
To modify Temperature units from Units of Measure menu,
press ↓ to
TEMPERATURE.
Surface clutter