Filter
Top Products
50
Sonar Chart Mode command with FishReveal selected
To turn FishReveal on:
1. From the Sonar Page, press
MENU|↓ to SONAR FEATURES|ENT.
2. Press ↓ to
SONAR CHART MODE|ENT|↓ to FISHREVEAL|ENT.
3. Press
EXIT|↑ to AUTO SENSITIVITY|ENT|↑ to SENSITIVITY|ENT.
4. Press ↑ until the Sensitivity Control Bar reads 100% (or close to it),
then press
EXIT. (If you reach the maximum limit, a tone sounds.)
Sonar chart in regular grayscale mode (left) and FishReveal mode
(right). Notice how shallow fish formerly hidden in the surface clutter
become visible in FishReveal mode.
NOTE:
Water conditions affect sonar performance. Under certain
conditions, FishReveal will show you more fish than normal
grayscale mode, but the reverse will be true in other circumstances.
We suggest you become familiar with both modes so you can best
match your sonar's performance to the current water conditions.
Visible
fish
Fish
not
visible
Fish
arch
Fish
arches