Filter
Top Products
42
Notice the size of the black alarm bar on the right side of the screen
changes as you manipulate the ↑ ↓ keys.
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
LOWER, then press ↑ or ↓ to move the bottom of the bar to the desired
depth. Notice size of the black alarm bar on the right side of the screen
changes as you manipulate the ↑ ↓ keys.
5. Press
EXIT|← to ZONE ALARM ENABLED|ENT|EXIT. Now, any echo —
fish, bottom or structure — within the zone alarm's depth range will
trigger the zone alarm.
6. To turn off the alarm, press
ALARM|↓ to ZONE ALARM
ENABLED|ENT|EXIT.
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in steps 3 and 4 above.
Fish Alarm
Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature (Fish I.D.
must be turned on for the Fish Alarm to work). A different tone sounds
for each fish symbol size shown on the display.
Sonar Alarms menu with Fish Alarm selected. The check box to the left
is blank, indicating the alarm is turned off.
To turn on the fish alarm:
1. Press ALARM.
2. Press ↓ to
FISH ALARM|ENT|EXIT.
3. To turn off the alarm, press
ALARM|↓ to FISH ALARM|ENT|EXIT.
Brightness
See the entry in this section for Screen Contrast and Brightness.