Filter
Top Products
29
Main Menu.
The Main Menu commands and their functions are:
Screen: changes the contrast or brightness of the display screen.
Sounds: enables or disables the sounds for key strokes and alarms and
sets the alarm style.
Sonar Alarms: turns alarms on or off and changes alarm thresholds.
Units of Measure: changes units of measure used for depth, speed,
distance and temperature.
Set Keel Offset: modifies the depth offset of the keel from transducer.
Calibrate Water Speed:
Reset Water Distance: sets the log of distance traveled back to zero.
Sonar Simulator: scrolls simulated sonar data on the display.
Reset Options: sets all options back to factory defaults.
Popup Help: turns on or off Pop-Up help.
Set Language: allows you to change the language used in the unit.
Software Information: displays version of software the unit is using.
Pages
The unit has four Page options that represent the four major display
modes. They are the Full Sonar Chart, Split Zoom Sonar Chart, Digital
Data and FlashGraf. The page options are accessed by pressing the
PAGE key, then using ↑ or ↓ to select an option. (Clear the Pages Menu
by pressing EXIT.)