Filter
Top Products
64
Pages Menu showing sonar chart display options
Full Sonar Chart
This is the default mode used when the unit is turned on for the first
time or when it's reset to factory defaults.
The bottom signal scrolls across the screen from right to left. Depth
scales on the right side of the screen aid in determining the depth of
targets. The line at the top of the screen represents the surface. The
bottom depth and surface temperature (if equipped with a temperature
sensor or a transducer with a temp sensor built in) show at the top left
corner of the screen.
The FasTrack™ display is just to the right of the scale. It changes all
echoes into short horizontal bars, replicating a flasher sonar. The zoom
bar on the far right shows the area that's magnified when the zoom is
in use. (See the Zoom section for more information.)
Full Sonar Chart with Overlay Data — depth and
water temperature — set to the small text size.