Filter
Top Products
48
Navigating with the Go To Cursor command. At left, a waypoint was
selected with the cursor. The image at right shows the straight-line
navigation course.
Red Course Line
The turn-by-turn magenta line is replaced with a red course line in
point-to-point mode. An "S" symbol is placed at the starting point. To
navigate a red course line, zoom the map screen in closely and steer so
the black arrow icon moves along the red course line. An arrival alarm
will sound when the destination is reached. Cancel navigation by going
to Options Page 1 and pressing
CANCEL NAVIGATION.
Steering Arrow and other Overlay Data
Different types of navigation information can be displayed as Overlay
Data. Overlay Data boxes will not appear in point-to-point mode unless
the Hide When Invalid setting is turned off. To do this, go to Options
Page 1 and select
OVERLAY DATA SETUP. In the Overlay Data Shown menu,
select the desired overlay type to display its Data Information screen.
Black arrow icon
Wa
yp
oint