Filter
Top Products
31
Power Key: Power Off and Standby
Power Off is the unit's default mode. Standby mode allows the unit to
"sleep" and draw very little battery power. If the unit is left idle for 12
hours, it will automatically leave Standby mode and switch to a full
shut down to save battery power. To place the unit in Standby mode,
select
STANDBY in the bottom right corner of the Interface Options
screen. To place the unit back in Power Off mode select
POWER OFF.
Units of Measure
This feature adjusts the units of
measure, including speed and
distance, heading, time and
date. The unit will not automatically up-
date when traveling to a different time
zone. Access the Set Local Time feature
and use the up and down arrows to reset
the local time.
To change any setting, press the button next to the format. Depth is
available when using optional lake or coastal maps for point-to-point
navigation.
Reset Options
To reset all customizable settings to factory defaults, select
RESET OPTIONS. A dialog box will appear asking if you want to
"Reset all the options?" To reset all options select
YES. An-