Filter
Top Products
45
But, if you want to learn about the various sonar options, see Sec. 4,
Sonar Options & Other Features.
You can access the Main Menu from any of the four Page screens by
pressing
MENU|MENU. To clear the menu screen and return to the page
display, press
EXIT.
Main Menu.
The Main Menu commands and their functions are:
Screen: changes the contrast or brightness of the display screen.
Sounds: enables or disables the sounds for key strokes and alarms and
sets the alarm style.
Transparency: adjusts the level of transparency for menus.
Alarms: turns sonar and GPS alarms on or off and changes alarm
thresholds.
Route Planning: used to plan, view or navigate a route.
My Trails: shows, creates and deletes plot trails. Also used to navigate
or backtrack a trail.
Cancel Navigation: turns off the various navigation commands. Used
to stop navigating after you have reached your destination waypoint,
Point of Interest or map cursor location; or after you reach the end of a
route or trail.
Sonar Setup: sets various sonar options.
GPS Setup: sets various GPS receiver options.
System Setup: sets general configuration options.
NMEA 2000: provides access to all NMEA 2000 network setup options,
including the configuration of devices on the network. For more infor-
mation, see Section 10: NMEA 2000 Menu.