Filter
Top Products
122
Create Waypoint at Current Position
While you are traveling, press WPT|WPT. The waypoint is saved and
automatically given a name with a sequential number, such as "way-
point 003." The waypoint symbol and number appear on the map.
Sequence for setting a waypoint. Step 1: while traveling, press WPT
twice to call up the Find Waypoint screen (seen in Step 2) and set a
waypoint. Step 3: a message says the waypoint has been saved. Step 4:
vehicle continues on its way; waypoint number and symbol are visible
on map.
NOTE:
The Quick Save method uses the default waypoint symbol until you
edit an existing waypoint and change its symbol. After a waypoint
symbol is changed, the unit will remember the one you chose and
use it the next time you save a waypoint. To go back to the default
symbol, edit a waypoint and choose the original symbol, or use the
Reset Options command.
Step 3.
Step 4.
Step 1. Step 2.