Filter
Top Products
66
2. To set the upper limit, press
ENT. Press ↑ or ↓ to change the first
number, then press → to move the cursor to the next number and
repeat until the depth is correct, then press
EXIT.
3. To set the lower limit, press ↓ to
LOWER LIMIT|ENT. Press ↑ or ↓ to
change the first number, then press → to move the cursor to the next
number and repeat until the depth is correct, then press
EXIT|EXIT|EXIT.
Normal display, in auto depth range mode, (left); Display "zoomed" with
Upper and Lower Limits focusing on the portion of the water column
from 25 feet to 45 feet deep (right). In the "zoomed" image on the right,
note the target definition, showing two fish holding just off the structure.
To turn off upper and lower limits:
From the Sonar Page, press
MENU|↓ to AUTO DEPTH RANGE|ENT|EXIT.
FasTrack
This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The rest of the screen continues to
operate normally. FasTrack gives you a rapid update of conditions
directly under the boat. This makes it useful for ice fishing, or when
you're fishing at anchor. When the boat is not moving, fish signals are
long, drawn out lines on a normal chart display. FasTrack converts the
graph to a vertical bar graph that, with practice, makes a useful
addition to fishing at a stationary location.
Fish arches
Area "zoomed"