Filter
Top Products
175
selection list
by pressing ENT, then press ↓ or ↑ to select a city name
from the list and press
ENT. The city name you selected is now in the
city field.
NOTE:
We recommend you do not enter a city name unless the list is too
long to search through. The unit can search more quickly when you
don’t enter a city name.
Find city field (left); search in particular city only option (center); Find
City by name (right).
6. When the necessary search fields are filled in, press ↓ to FIND
ADDRESS|ENT. Your unit asks you to wait while it searches for the
address. (If an address is not in the database, a message appears
saying the address could not be found.)
7. The unit will display a list of addresses. If the address you are
looking for is highlighted at the top of the list, press
ENT. If not, use ↓
and ↑ to select the correct address from the list, then press
ENT. The
Map Page will appear with the location selected by the cursor. (In the
example below, there were two addresses found, but we are looking for
12303 East 11th Street, not 11th Court, so we had to scroll down the list
to select the correct address.)
Address search result list (left); Address page options, Find or Go To
(center). After the address is located, you can navigate to it (right).
8. To navigate to the address, press ENT|→|ENT and your unit will
begin showing navigation information to the address pointed out by the
cursor. If you are only looking up an address (not navigating), just
press
ENT to see the location pinpointed on the map.