Filter
Top Products
73
of batteries, remember: a prudent navigator never depends on only one
source of navigation information. A good map and compass are impor-
tant companions for you and your iFINDER.
To access the Power saving feature:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to POWER SAVING|ENT.
2. Press → or ← to move the slider bar. The left end of the scale is
minimum power saving (full battery power); the right end of the scale is
maximum power saving (minimum battery power.)
3. To return to the last page displayed, press
EXIT|EXIT.
The Power Save menu at Min Power save (shown left center)
and Max Power Save (shown right).
For even greater power efficiency you can stop receiving GPS signals
entirely by activating the Use Indoors command. Use Indoors is de-
scribed later in this section.
Reset Options
To reset all features to their factory defaults:
Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to RESET OPTIONS|ENT|← to
YES|ENT.
NOTE:
Reset Options does not erase any waypoints, routes, icons or plot trails.
Screen Contrast and Brightness
To access the Screen Menu, press MENU|MENU|ENT. Once in the
Screen Menu, you can adjust the various levels using the following in-
structions.
To adjust the display's contrast:
1. The
CONTRAST slider bar is already selected. Press → or ← to move the
bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.
offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234