Filter
Top Products
39
Tip:
You don't need to have an emergency to use the MOB waypoint. When
you set the MOB point, just cancel navigation and then use MOB like
a regular waypoint. (Remember, you can set up to 2,000 waypoints.)
To cancel navigation to MOB, press
MENU|↓ to CANCEL NAVIGATION|ENT|←
to
YES|ENT. If you want to return to the map, press MENU|↓ to SHOW
MAP|ENT. iFINDER stops showing navigation information.
Cancel Navigation
Press
MENU|MENU|↓ to CANCEL NAVIGATION|ENT|← to YES|ENT.
Navigate a Route
1. Press
MENU|MENU|↓ to ROUTE PLANNING|ENT.
2. Press ↓ to select route name|
ENT|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU|↓ to CANCEL NAVIGATION|ENT|← to YES |ENT.
Navigate to Cursor Position on Map
The Go To Cursor command navigates to the current cursor position
on the map. It's a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the map until you find a location
you want to go to.
2. Center the cursor over the location to select it. See the example be-
low. (Many map items such as waypoints, Points of Interest, towns, etc.
can be "selected," and appear "highlighted" with a pop-up box. Other
features, such as a river or a street intersection will not appear "high-
lighted," but the cursor will take you to those locations just the same.)
Navigate to cursor. In this example, the cursor has selected the town of
Oologah, Oklahoma.
offered by www.Busse-Yachtshop.de email: info@busse-yachtshop.de Tel: +49 (0)4347 908234