Filter
Top Products
Page 5-12
L-3 ELAC Nautik
To alter the External PC Mode, press the following keys:
• Call up the INTERFACES SUB-MENU as described previously
• CURSOR W (1x, to mark the word Mode)
• ENTER (1x, to mark the selected mode)
• CURSOR W or V (to alter the mode)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)
To alter the External PC Baud rate, press the following keys:
• Call up the INTERFACES SUB-MENU as described previously
• CURSOR W (2x, to mark the word Baud)
• ENTER (1x, to mark the selected Baud rate)
• CURSOR W or V (to alter the Baud rate)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)
To alter the NMEA/DAZ 25 Mode, press the following keys:
WARNING: The NMEA/DAZ 25 interface Mode and Baud rate are laid down by the National
Marine Electronics Association. If these are altered, the interface will no
longer be to this NMEA standard.
• Call up the INTERFACES SUB-MENU as described previously
• CURSOR W (3x, to mark the word Mode)
• ENTER (1x, to mark the selected mode)
• CURSOR W or V (1x, to alter the mode)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)
To alter the NMEA/DAZ 25 Baud rate, press the following keys:
• Call up the INTERFACES SUB-MENU as described previously
• CURSOR W (5x, to mark the word Baud)
• ENTER (1x, to mark the selected Baud rate)
• CURSOR W or V (to alter the Baud rate)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)