Filter
Top Products
Page 5-10
L-3 ELAC Nautik
• Call up the CHANNEL 1 SUB MENU as described previously
• CURSOR W (3x, to mark the word Blocking Depth)
• ENTER (1x, to mark the 1st digit)
• CURSOR W or V (to alter the metre (1st digit) setting)
• ENTER (1x, to confirm selection and jump to 2nd digit)
• CURSOR W or V (to alter the 1/10th of a metre (2nd digit) setting)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)
To alter the Frequency setting, press the following keys:
• Call up the CHANNEL 1 SUB MENU as described previously
• CURSOR W (3x, to mark the word Frequency )
• ENTER (1x, to mark the frequency selected e.g. 200)
• CURSOR W or V (to alter the setting)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)
IMPORTANT NOTE: The new setting can only be activated by re-starting the system (i.e.
switch the system OFF and then ON again).
To alter the Location setting, press the following keys:
• Call up the CHANNEL 1 SUB MENU as described previously
• CURSOR W (5x, to mark the word Location )
• ENTER (1x, to mark the location selected e.g. BOW)
• CURSOR W or V (to alter the setting)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)