Filter
Top Products
Page 4-5
L-3 ELAC Nautik
4.3.2 2 CHANNEL DISPLAY
In the 2 channel mode information of the transducer location and frequency of the transducer in
use is added.
If the presentation channel 1/2 is selected, Information of both channels are shown in a vertical
split display.
The indication NAV OFF is activated without flashing to indicate, that all parameters are mode of
presentation is non standard. For each transducer depth location and frequency is shown.
For transducer location and frequency see chapter 5.1.2 Initial System Set - up.
40
10
20
20
40
10
20
20
m
m