Filter
Top Products
Page 5-7
L-3 ELAC Nautik
Once the system has been correctly installed, the initial set-up can be carried out. Call up the
SYSTEM SET-UP MENU by pressing the ENTER key four (4) times. When the SYSTEM SET-UP
MENU appears on the display area, press the CURSOR W key three (3) times so that the word
Service is highlighted as shown below.
Press the ENTER key and the WARNING shown below will appear.
Changing parameters
in the following
menus should only
be done by qualified
persons
Continue ? NO NO/YES, select YES for SERVICE menu
WARNING!
WARNING: Only qualified service technicians are allowed to alter these system settings. If
you are not authorised to alter these settings, DO NOT continue. Press either
the ENTER or ESCAPE key to return to the SYSTEM SET-UP menu.
UNAUTHORISED ALTERATION OF THESE SETTINGS CAN ENDANGER THE SAFETY OF
THE SHIP AND LEAD TO LOSS OF LIFE AND LIMB.
If not authorised to make alterations, press the ESCAPE or ENTER key to return to the
SYSTEM SET-UP menu.
Date 11.02.03
Time 12:34
Color up
Color down
Version
SYSTEM-SETUP
Service >>
Version number and date