Filter
Top Products
Page 4-26
L-3 ELAC Nautik
4.5.4 THE SYSTEM SET-UP MENU
WARNING: With the exception of the time, date and contrast, no other parameters must
be altered unless modifications are made to the system, e.g. altering the
installation depth of the transducer, replacing the transducer for one of a
different frequency. Alteration of such parameters must only be made by an
experienced service technician.
PARAMETER ALTERATIONS MADE BY NON-QUALIFIED PERSONS MAY LEAD TO
INCORRECT DEPTH READINGS WHICH IN TURN CAN LEAD TO MATERIAL DAMAGE AND
TO THE LOSS OF LIFE AND LIMB
To call up the SYSTEM SET-UP MENU, press the ENTER key four times. The MENU as shown
below will appear.
The SYSTEM SET-UP MENU is used to set the Time and Date and to gain access to the
SERVICE and INTERFACE SUB MENUS to allow the service technician to alter installation and
interface parameters (see above warning).
Changing the Date and Time
To change the system DATE, call up the SYSTEM SET-UP MENU and press the following keys:
• CURSOR W (1x, to mark the word Date)
• ENTER (1x, to mark the day setting)
• CURSOR W or V (to alter the day setting)
• ENTER (1x, to confirm selection and jump to the month setting)
• CURSOR W or V (to alter the month setting)
Date 29.06.94
Time 12:34
Color up
Color down
Version
SYSTEM-SETUP
Service >>
Version number and date