Filter
Top Products
Page 4-18
L-3 ELAC Nautik
4.5.2 THE PARAMETER MENU
To call up the PARAMETER MENU, press the ENTER key twice.
Channel Select 1 (1, 2, 1/2)
Sound Velocity 1500 (1400....1699)
Units m (m, ftm, ft)
Depth Mode DBK (DBK, DBT, DBS)
(Auto, Man)Gain auto
PARAMETER
The PARAMETER MENU is used to select system parameters which vary from those laid down by
the IMO. The following and settings can be made within this MENU:
• Channel selection
• Sound velocity setting
• Unit of measurement selection
• Depth mode selection
Channel Select
The Channel Select function is only operative if the system is fitted with two transducers. When the
system is switched on, channel 1 is the default setting. This function is used to select the channel
to be presented on the display area. Presentation of either Channel 1, Channel 2, or both is
possible. If both channels are selected, they will appear side by side on the display area,
Channel 1 to the right and Channel 2 to the left. Call up the PARAMETERS MENU and press the
following keys to make a selection:
• CURSOR W (1x, to mark Channel Select)
• ENTER (1x, to mark Channel number)
• CURSOR V or W (to make selection)
• ENTER (1x, to confirm selection)
• ESCAPE (2x, to leave the MENU)