Filter
Top Products
Page 4-13
L-3 ELAC Nautik
Press the ENTER key and the cursor will jump to the first digit of the alarm setting, in this case a 1,
as shown in the MENU below.
Change the 1 to a 0 by pressing the CURSOR W key. Press the ENTER key to confirm. The cursor
will jump to the next digit, a 9. Repeatedly press the CURSOR W key until the desired value is
reached, in this case a 6. Press the ENTER key to confirm. The cursor will jump to the next digit,
again a 9. Set this to 1 using the CURSOR W key. Press the ENTER key to confirm, the cursor
jumps to the 0 which need not be altered. Now that the desired value, 410m, has been set, press
the ENTER key to confirm. The cursor will jump to the word "Status" as shown in the MENU below.
NAV-Defaults >>
Alarm
Depth 0020
Status ON
Alarm
Depth 1990
Status OFF
Test Alarm
ALARM
Depth
NAV-Defaults >>
Alarm
Depth 0020
Status
Alarm
Depth 990
Status OFF
Test Alarm
ALARM
ON
1