KTM 690 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 85
Checking the rear hub rubber dampersbx
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
Remove the rear wheel.b
x ( P. 82)
100148-10
Check the rubber dampers of the rear hub for damage and wear.
» If the rubber dampers of the rear hub are damaged or worn:
Change all rubber dampers in the rear hub.
100149-10
Lay the read wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
To check the playb
, hold the rear wheel tight and try to rotate the rear sprocket.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel ืb5bmm (ืb0.2bin)
» If the playb
is more than the specified value:
Change all rubber dampers in the rear hub.
Fit the rear wheel.b
x ( P. 83)