Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 113
100191-10
ದ Switch off the engine and allow it to cool down.
ದ After the engine has cooled down, check the coolant level in the radiator again and add
more coolant if necessary.
ದ Remove the cap of the compensating tankb
and top up the coolant level up to
thebMAX marking. Replace the cap of the comensating tank.
ದ Position the fuel tank. ( P. 91)
ದ Mount the seat. ( P. 89)
Adjusting basic position of clutch lever
Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
100115-10
(690bSUPERMOTO)
ದ Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screwb
.