KTM 690 Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 102
100157-10
Take the rubber cap off the headlight lamp.
Turn the bulb holderb
about 30° counterclockwise and remove it.
Take the headlight bulb out of the headlight housing.
Check parts for damage and wear. Replace damaged or worn parts.
Insert a new headlight bulb into the headlight housing.
Headlightb(H4/P43t) ( P. 143)
Info
Insert the headlight bulb so that the bayonet lugsb latch into the slotsb.
Position the bulb holder and turn it clockwise as far as it will go.
Replace the rubber cap.
Refit the headlight mask with the headlight. ( P. 100)
Changing the parking lamp
Note
Damage to reflectorKeep the glass of the bulb free of grease.
After fitting the bulb in the holder, clean the glass with a clean cloth. Any grease on the glass will evaporate by the heat and be de-
posited on the reflector.
Switch off all power-consuming components and switch off the engine.
Remove the headlight mask with the headlight. ( P. 99)