Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 103
100161-10
ದ Pull the parking light bulbb out of the holder.
ದ Check parts for damage and wear. Replace damaged or worn parts.
ದ Insert a new parking light bulb in the holder.
Parking lightb(W2,1x9,5d) ( P. 143)
ದ Refit the headlight mask with the headlight. ( P. 100)
Changing flasher bulb
Note
Damage to reflectorಘKeep the glass of the bulb free of grease.
ದ After fitting the bulb in the holder, clean the glass with a clean cloth. Any grease on the glass will evaporate by the heat and be de-
posited on the reflector.
100160-10
ದ Remove the screw on the rear of the flasher housing.
ದ Carefully swing the diffuserb
forwards and remove it.
ದ Press the flasher bulb carefully into the holder, turn it about 30° counterclockwise and
remove it from the holder.
Info
Do not touch the reflector with your fingers and try to avoid contact will oil or
grease.
ದ Check parts for damage and wear. Replace damaged or worn parts.